Front of the Amiga 1200

Back of the Amiga 1200

Need phillips screwdriver.

Remove Expansion Port

Now you need to Remove 8x screws from the Amiga

Now Remove this one, As shown in pics

Now Remove this one, As shown in pics

Now Remove this one, As shown in pics

Now Remove this one, As shown in pics

Now Remove the two screws, As shown in pics

Now Done

Now ready

Flip the Amiga back to its right way up

Now Remove front case

Now Remove ribbon with two hands very carefully

Now you can remove the Keyboard

Keyboard Removed

Now Remove the Black-Red-Orange-Green cable

Now Remove front case out of the way

Now Remove screws from the Floppy drive, As shown in pics

Now Remove the Brown-Black-Red Cable

As shown in pics

Now Remove Floppy Drive

Now Remove the Hard Drive cable, As shown in pics

Now Remove Hard Drive

This is the A1200 Roms v3.0

from http://amigakit.com for £16.99 + P&P

Now Remove this one, As shown in pics

Base of the Amiga 1200

Amiga 1200 Expansion slot

Amiga 1200 Expansion slot

Now You are Ready to Remove metal shielding

Now lift up the 2x Tab, As shown in pics

Now lift up the Tab, As shown in pics

Now lift up the Tab, As shown in pics

Now Remove metal clip

Now lift up the Tab, As shown in pics

Now lift up the Tab, As shown in pics

Now lift up the Tab, As shown in pics

Now lift up the Tab, As shown in pics

Now lift up the Tab, As shown in pics

Now You are Ready to Remove metal shielding be very careful it is sharp

Now You are Ready to Remove the screws nuts

Remove all

Remove all, As shown in pics

Remove all, As shown in pics

Now Remove

Now Remove

Now Remove

Now Remove A1200 motherboard from metal shielding.

Now you are left with metal shielding

Now Remove the plastic strip from metal shielding

To reassemble just reverse the above. Hope you find this helpful.

Amiga 1200 now Stripped down